User`s manual

V 1 P R O F E S S I O N A L 5 . 7
87
Intranet (LAN) utilization
When you “hold down” bin buttons, or move videos between bins, the V1 (by default)
searches for removable media and other V1 network peers. In certain non-network
cases, this behavior may cause your system to “hang” for a minute or longer before it
“gives up.” To disable the network search, set this option to “do not access the LAN.”
If you are using a network, and experience slower than expected response times, you
might try the “yes, using method 2” option in place of the default “method 1.” For
more information about networking multiple V1s, see the Networking section at the
end of the Working with Videos chapter.
Launch Monitor Options
The V1 has been designed to receive ball flight parameters from either the Accusport
Vector 2.2 or Zelocity PureLaunch launch monitor if one of these is connected to the
V1 PC. A Launch Monitor Options page may be found on the V1 Options window:
You may choose to Automatically launch software when the V1 starts . The V1 will
attempt to open the launch monitor software in a “minimized” state (you may see its
icon appear on the bottom of your Windows desktop if you’re not running the V1 in
full-screen mode). With this option selected, the launch monitor software will also
automatically be closed when you close the V1.
If the launch monitor and its software have been properly installed and are running at
the time you perform an impact trigger recording (see the Video Recording chapter for
details), you will see the ball speed appear on the tab. Other parameters, such as ball
flight distance and spin are accessible via the Video Information Database (see the
Working with Videos chapter).
NOTE: If you are running the V1 in full-screen mode, you will want to avoid
“switching” windows (Alt+Tab) to the launch monitor software, as this software
requires a high-resolution desktop (1024x768 pixels or more) for proper viewing.
NOTE: When using the Zelocity PureLaunch, we recommend that you select the
option Automatic device arming from the PureLaunch Options menu in order to
avoid the necessity of constantly switching between the V1 and PureLaunch interfaces
to re-arm the PureLaunch system before each swing.