User`s manual

Specifications, Requirements, and Precautions AW00098504000
2 Basler ace Camera Link
1.2 General Specifications
Specification acA2000-340km acA2000-340kmNIR acA2000-340kc
Sensor Resolution
( H x V pixels)
2048 x 1088 2048 x 1088 2046 x 1086
Sensor Type CMOSIS CMV 2000
Progressive scan
CMOS
CMOSIS CMV2000--2E12M
Progressive scan CMOS
CMOSIS CMV 2000
Progressive scan
CMOS
Optical Size 2/3"
Pixel Size 5.5 µm x 5.5 µm
Max Frame Rate
(at full resolution and
10 bit sensor depth)
340 fps
Mono/Color Mono Mono (NIR) Color
Sensor Bit Depth 12 bits or 10 bits (selectable)
Data Output Type Camera Link base or medium, or full configuration
Camera Link Connectors Two 26-pin SDR connectors (also known as Mini Camera Link connectors)
Camera Link Clock Speed 32.5 MHz, 48 MHz, 65 Mhz, or 82 MHz (selectable)
Camera Link Tap Geometry 1X2-1Y, 1X3-1Y, 1X4-1Y, 1X6-1Y, 1X8-1Y or 1X10-1Y
Pixel Data Formats Mono 8,
Mono10, or
Mono 12
Bayer GB 8,
Bayer GB 10, or
Bayer GB 12
Synchronization Via external trigger signal, software trigger signal, or free run
Exposure Control Trigger width or timed
Power Requirements PoCL (Power over Camera Link compliant)
or
+12 VDC (± 10%), < 1% ripple, supplied via the camera’s 4-pin connector
Max Power Consumption 3.0 W @ 12 VDC
I/O Lines 1 GPIO (can be set to operate as an input or an output)
Lens Adapter C-mount
Size
(L x W x H)
43.5 mm x 29.0 mm x 29.0 mm (without lens adapter or connectors)
58.9 mm x 29.0 mm x 29.0 mm (with lens adapter and connectors)
Weight < 90 g (typical)
Conformity CE, FCC, GenICam, RoHS, Camera Link, IP30
Driver Basler pylon (release 2.3 or newer)
API for Configuration Register-based API for C or VB6
Basler pylon C++ API
Table 1: General Specifications