User`s manual

Features AW00098504000
208 Basler ace Camera Link
10.10 Error Detection
10.10.1 LED Indicator
The LED indicator on the back of the camera includes both a small red LED and a small green LED.
The LED indicator signals the camera’s current condition as shown in Table 13.
LED State Status Indication
Red and Greeen Both Off No power to the camera.
Continuous Green / Red Off The camera has booted up successfully and is OK.
Flashing Green / Red Off The camera is set to expect an external trigger signal on an input, but no
trigger signal is present.
Green and Red Both Flasing An error condition has been detected that may be correctable with user
intervention. (See the next section for more information).
Flashing Red / Green Off Internal error. Contact Basler technical support.
Table 13: LED Indications
During the camera bootup process, both the red and the green LEDs will be lit.