User`s manual

Image Acquisition Control
138 Basler pioneer
For more information about AOI settings, see Section 13.5 on page 185.
For more information on the settings that determine the bandwidth assigned to the camera, see
Section 7.2 on page 92.
Formula 1:
Calculates the maximum frame rate based on the sensor readout time:
Where:
AOI Height = the height of the acquired frames as determined by the AOI settings.
The constants C
1
and C
2
depend on the camera model as shown in the table below:
* Note: The maximum frame rate of the piA1900-32gm/gc is limited to 32 fps.
Formula 2:
Calculates the maximum frame rate based on the exposure time for the acquired frames:
Where:
The constant C
3
depends on the camera model as shown in the table below:
C
1
C
2
piA640-210gm/gc 8.76 µs 521.17 µs
piA1000-48gm/gc 13.39 µs 7423.76 µs
piA1600-35gm/gc 20.52 µs 3873.2 µs
piA1900-32gm/gc* 0 µs 31021.26 µs
piA2400-12gm/gc 26.18 µs 26001.76 µs
C
3
piA640-210gm/gc 46.99 µs
piA1000-48gm/gc 95.57 µs
piA1600-35gm/gc 79.64 µs
piA1900-32gm/gc 139.38 µs
piA2400-12gm/gc 76.80 µs
Max. Frames/s
1
AOI Height C
1
×[]C
2
+
---------------------------------------------------------------=
Max. Frames/s
1
Exposure time in µs C
3
+
------------------------------------------------------------------=