User`s manual

Software and Hardware Installation
34 Basler pioneer
2.2.5.3 Unbinding the Basler Filter Driver from a Non-compatible GigE
or a Fast Ethernet Network Adapter
During installation of the Basler pylon SDK or the Basler pylon Viewer, the current network adapter-
driver associations will be changed for all network drivers installed in your PC with Basler drivers
replacing the current drivers.
Your application may require that no Basler network driver is bound to an adapter that is not used
for a camera.
As an example, the following procedures describe how to unbind the Basler filter driver from a Fast
Ethernet (or non-compatible GigE) network adapter:
1. Open a Network Connections window. Make sure that the window is set to display details (right
click within the window, select View, and select Details).
2. Find the entry for the network adapter from which you want to unbind the Basler network driver.
3. Right click on the name of the network adapter.
4. Select Properties from the drop down menu. A LAN Connection Properties window for the
adapter will open.
5. Look for the list box in the middle of the window that is labelled This connection uses the
following items.
6. In the list, find the entry for Pylon GigE Vision Streaming Filter and uncheck the entry.
7. Click the OK button.
8. The driver will be unbound and the Properties window will close.
The Basler network driver is unbound.
Note
You could completely uninstall the Basler network driver by clicking on its entry
in the list and then clicking the Uninstall button. Be aware that doing so will
remove the Basler network driver from all network adapters