User`s manual
Software and Hardware Installation
Basler pioneer 49
Note that it is not possible to improve the signal-to-noise ratio by increasing gain. Increasing the
gain will increase both signal and noise in equal proportions.
White Balance:
ξ If you are using a color camera, the object that you use when adjusting the white balance
should be a uniform gray and should fill the cameraβs entire field of view. Your white balance
will be correct when images of this object show a uniform gray.
ξ Changing the black level setting will change the white balance. We therefore recommend that
you check the white balance after setting the black level.
ξ Make sure the image is neither underexposed nor overexposed when checking the white
balance.