Brochure

To learn more about the BASO K Series Thermocouples contact:

BASO Gas Products LLC • 1007 South 12

Street, Watertown, Wisconsin 53094

Phone: 877-227-6427 • Fax: 920-261-3878 • Visit www.baso.com

K Series

Thermocouples

Manufactured in the USA

Our thermocouples can be used in a variety of thermo-electric valves

to provide reliability that will out perform the competition.

3 These Thermocouples are for BASO brand thermo-electric valves or pilot

burners; however, most models are interchangeable with many other

manufacturers.

3 Various tip constructions and lengths are available.

3 Series K16F and K16J have a built-in junction block which allows for

connection of a high limit switch.

PAGE 1
K Series Thermocouples Manufactured in the USA Our thermocouples can be used in a variety of thermo-electric valves to provide reliability that will out perform the competition. 3 These Thermocouples are for BASO brand thermo-electric valves or pilot burners; however, most models are interchangeable with many other manufacturers. 3 3 Various tip constructions and lengths are available. Series K16F and K16J have a built-in junction block which allows for connection of a high limit switch.
PAGE 2
K14 Series Designed specifically for Catalytic heaters. Longer length tip allows for operation in a heater without a flame present. • K14 MA models are standard threaded units K15 Series Designed for automatic pilot controls and pilot burners.