User Manual

4 BGD278 Series BASOTROL CE Approved Gas Valve Installation Instructions
Repairs and Replacement
Table 1: Replacement Solenoid Coil
Part Number Description
RSDA16A-12
12 VDC; 2-tab 15 VA Coil
RSD16A-25V
25 VDC ; 2-tab 17 VA Coil
RSDA16A-25
25 VAC; 50/60 Hz; 3-tab 15 VA Coil
RSDA16A-25A
25 VAC ; 50/60 Hz, 2-tab 15 VA Coil
RSDA16A-120
120 VAC; 50/60 Hz; 3-tab 15 VA Coil
RSDA16A-240
240 VAC; 50/60 Hz; 3-tab 15 VA Coil
Field repairs other than solenoid coil replacement must
not be made to the BGD278 valve.
Any attempt to repair this assembly voids the
manufacturer’s warranty. For a replacement valve,
contact the original equipment manufacturer or the
nearest BASO Gas Products distributor.
L
N
L
N
Non-Polarity Sensitive
Line and Neutral
Connections
Non-Polarity Sensitive
Line and Neutral
Connections
To Main SolenoidTo Pilot Solenoid
L2
N2
N1
L1
Coil 2
Main
Valve
Coil 1
Pilot
Valve
Earth Ground
Line 2
Neutral
Line 1
Twin Solenoid Wiring Using 4-Wire Cable
Ground Tab
25V, 120V and 240V Only
Ground Tab
25V, 120V and 240V Only
Ground Tab
120V and 240V Only
Figure 5: 3-Tab Electrical Connections