User manual

axle extensions to be inserted all the way into the wheel so the axle sprocket

locks into the hub. If not locked in, the wheel will not be connected to the clutch

and will not be propelled or come off! Test the lock by trying to pull the wheel out.

Attention: Make sure that the right wheel (marked) is attached to the right side

and the left wheel (marked) to the left side (seen from behind in driving

direction), as the wheels have built in clutches. The caddy will not move if the

wheels are not on the proper side. Reverse the action to remove the wheels.

4. Place battery pack on battery tray and fasten Velcro strap around battery tightly.

Insert 3 prong battery plug into caddy outlet so notch aligns properly with plug.

Note: Before connecting make sure that Rheostat Speed Control on handle is

in OFF position!

5. Install optional accessories, such as Scorecard/Beverage/Umbrella holder, below

handle in the foreseen places or receptors. Instructions provided separately.