User manual

12
Installation of Seat
Attach seat holding bar to caddy frame
Attach seat stand to seat bottom using the four small screws.
Attention: Attach in such manner that the seat is parallel to the driving direction of the
caddy, with the opening facing the outside when you slide it into the holding bar.
Slide seat stand into holding bar as shown. Due to the spring mechanism, the seat should
reach the ground when pushed down, so the weight rests solely on the ground.
Note: DO NOT attempt to sit on the seat while trying to move the caddy, or frame damage
might occur!
Test caddy power supply by pressing On/Off button for 2-5 seconds. All control lights
should come on and the caddy should be operable by both the manual control on the
handle and the remote control. Note: Familiarize yourself with the handle and remote
control functions (X3R only) BEFORE you start operating the caddy. Practice in a wide
area free of obstacles, people or any other danger.