Operation Manual

Technical data
Nominal voltage 230 V~
Frequency 50 Hz
Nominal power 600 W
Safety class II / doppelisoliert
Degree of protection IP 20
Cable length 3000 mm
Idle speed
5000 min
-1
Saw blade diameter
(outer) 89 mm
Saw blade bore (inner) 10 mm
Saw blade’s thickness
TCT 1,9 mm
HSS 1,2 mm
Diamant 1,8 mm
Admissible
type of saw blade TCT
HSS
Diamant
Sound pressure level L
pA
83,1 dB(A)
Uncertainty K = 3 dB(A)
Sound power level L
WA
94,1 dB(A)
Uncertainty K = 3 dB(A)
Vibration a = 2,451 m/s
2
Uncertainty K = 1,5 dB(A)
Cutting depth max. 28,5 mm
*) the values mentioned are emission levels and
must therefore not be used to represent safe
workplace values. Although there is a
correlation between emission and exposure
levels, it cannot be reliably derived from them
whether extra caution is required or not.
 Factorsthatinuencetheexposurelevelon
the current working space include the type of
working space, other noise sources, for
example the number of devices and other
near-by work processes. The values accepted
for one working space also may vary from
country to country.
This information will however enable the user
to better assess the dangers and risks
involved.
Spare parts/Accessories
Spare parts and accessories can be ordered through
our webshop: www.batavia.eu
25
EN
Failures und Assistance
If something does not work...
DANGER
Mortal danger!
MORTAL DANGER!
Improper repair work can lead your
device to no longer work safely.
 Youendangeryourselfandthe
environment.
Often, it is only a small error leading to a failure.
Inmostcases,youcaneasilyxthisyourself.
Pleasecheckthefollowingtablerstbefore
contacting your dealer That way you will save
yourself much trouble and possibly some expense
too.
Engine does not work.
No voltage?
• Checkcable,plug,Socketandfuse.
Engine overheats?
• Removethecauseforoverheating,letcool
down for a few minutes then restart.
Device overloaded?
• Removethecauseofoverload.
Cutting not performing enough.
Is the saw blade dull?
• Changesawblade(☞ Change saw blade
– Page 19).
Is the saw blade suitable for that material?
• Changesawblade(☞ Change saw blade
– Page 19).
The saw vibrates strongly.
Is the saw blade warped?
• Changesawblade(☞ Change saw blade
– Page 19).
Isthesawbladebadlyxed?
• Changesawblade(☞ Change saw blade
– Page 19).
Ifyoucannotxtheproblemyourself,then
contact your dealer. Please note that improper
repairs invalidate the guarantee and that you may
incur additional costs, where appropriate.