operation manual

5
English
5. Rotatethemoving
jawlockingtab(11)to
thehorizontalposi-
tionandCroclock
Compactisnow
readyforuse.
FOLDING
Foldingisthereverseprocedureofabove.
Ensurethat:
•
Thelock/release
switchisinthe
“unlockposition”;
•
Thefootpedallock-
inglatch(8)isused
toreleaseandfold
thefootpedal;
•
Themovingjawlock-
ingtab(11)isinthe
“vertical”positionto
preventthejawfrom
slidingout
•
Therearlegis
engagedfullyintoits
housingandtherear
leglockingknob(10)
istightenedrmly.
When in its
folded position
the rear leg
becomes a
carrying handle,
to aid in
transportation.
OPERATION
CLAMPING
1. Checkthatthemovingjawlockingtab
(11)issettothehorizontalpositionand
pushthemovingjaw(1)backuntilyour
workpiecetsbetweenthejaws.
2. Placetheworkpieceagainstthexedjaw
(2)andslidethemovingjawforwarduntil
ittouchestheworkpiece.
The jaw can also be advanced
forward by pressing the foot pedal
repeatedly.
3. Slidethelock/releaseswitch(4)downto
the“lock”position.
If preferred the switch can be
locked after the work is clamped.
4. Applydownward
pressureonthefoot
pedal(5)until
sufcientclamping
forcehasbeen
applied.
For extra force you may stand on
the foot pedal (maximum 100kg) but
do not jump on it, as you could
damage the unit.
7061991_CrocLockCompact_MA_1401-20 4.indd 5 26-05-14 13:01