Use and Care Manual

BathWorks
Bathtub & Tile Refinishing Kit
CARE TIPS FOR YOUR TUB
Your bathtub or bath fixture has just been resurfaced with the finest
product in Tub and tile resurfacing used today Shurbond!
To maintain the beauty of your tub surface:
1. As with a new bathtub, remove excess water and wipe dry after
each use
2. Always be sure faucets are tightly closed and the shower pipe is
drained after each use
3. DO NOT rest any soap bottles, spray cans, or wet clothes on
the surface for long periods of time
4. NEVER use hair dye in a refinished bathtub
5. If bathing pets in the bathtub always place a towel down to prevent
scratches
Bathmats:
If you do not have a non-slip surface applied and you find the surface
too
Slippery, you can use a NON-SUCTIONED bath mat or a towel- It must
be
picked up after each use. Do not hang the mat or towel over the
bathtub.
Use of a suctioned bathmat, stick-on strips will cause failures
Cleaning:
1. Even though the bathtub does not look dirty, it should be cleaned
at least once a week with a liquid non-abrasive cleaner such
as Scrubbing Bubbles (recommended), 409, or Fantastic.
2. NEVER USE abrasive cleaners such as Ajax, Comet or Soft
Scrub on the refinished surface. If the non-slip protection is applied on
the bottom of the bathtub, you can use Soft Scrub on that area as
needed
Remember: if you treat your new surface with respect, clean it
regularly and keep your taps dry, your tub will stay shiny and bright
for many years. Use BathWorks Cleaner & Polishing Kit for the
Ultimate
Shine & Protection!
“LIKE” us on Facebook.com/munroproducts
America’s #1 Choice in Bathroom Restoration
For over 45 Years!
www.bath-works.n

Summary of content (1 pages)