Instructions / Assembly

ManualsBrandsBATHWORKS ManualsAppliance, Tub & Tile Paint22 oz. DIY Bathtub Refinish Kit with SlipGuard- White

Tub, Tile, Wall Surround, & Sink

Refinishing Kit

IMPORTANT:

Please read through the instructions carefully before starting project

PREMIUM KIT INSTRUCTIONS

Some kits may include Non-Slip Additive (2oz) and 2" Yellow Sponge Roller

For all cast iron, steel, & ceramic fixtures - Bathworks® EZ Etch Kit is strongly recommended.

If unsure, do not paint, and return kit unopened.

Supplies Included

Recommended Supplies (Not Included)

Part A - Paint (16oz)

Part B - Hardener (4oz)

Liquid Primer (1oz)

Etching Cleaner

Tack Cloth

Latex Gloves

Mixing Container

12" Paint Tray

4" Foam Roller on 9" Handle

2" Foam Brush

Wet/Dry Sandpaper (120 Grit)

Stir Stick

Instructions (with Safety Warnings & Care Tips)

Protective Surface Coverings

Blue Painters Tape

Paper Towels

Razor Blade or Scrapers

Hair Dryer or Wet-Vacuum

Ventilator Fan

100% Silicone Caulk

Garbage Bag

For BWK, BWNS, BWQD Model Series Kits

120 sq ft per kit

2 coats per application.

Coverage

Surface

Area (sq ft)

# of Kits

Needed

Surface

Area (sq ft)

# of Kits

Needed

110

140

125

175

Standard Tub

(60"x30")

Large Tub

(72"x36")

Corner Tub

(60"x60")

Bathtub Only

Bathtub & 6' Surround

Safety & Clean Up

Liquid products found within this kit are solvent-borne and are highly flammable. Care should

be taken to avoid the inhalation of spray mist or vapors, as well as contact between the wet paint

and exposed skin or eyes. Always keep work areas well ventilated and wear personal protective

equipment - respirator, eyewear, & gloves. Keep away from flame, children, animals, and

individuals sensitive to fumes. Always ensure nearby surfaces are covered and protected.

Cleaning solvent for this paint is Xylene or a similar substitute. In the event of spills, ensure that

Xylene is appropriate and safe to use on intended surfaces as there's a risk of serious and

permanent damage to surfaces such as linoleum, plastics, wood and anything previously painted.

See additional safety notes at the end of this document.

Any other items you may feel necessary depending on your situation.

Comet® or Ajax®

Respirator

Protective Eyewear

Summary of content (6 pages)

PAGE 1
Tub, Tile, Wall Surround, & Sink Refinishing Kit PREMIUM KIT INSTRUCTIONS For BWK, BWNS, BWQD Model Series Kits IMPORTANT: Please read through the instructions carefully before starting project Supplies Included Mixing Container 12" Paint Tray Part A - Paint (16oz) Part B - Hardener (4oz) 4" Foam Roller on 9" Handle 2" Foam Brush Liquid Primer (1oz) Wet/Dry Sandpaper (120 Grit) Etching Cleaner Tack Cloth Stir Stick Instructions (with Safety Warnings & Care Tips) Latex Gloves Some kits may include Non-Slip
PAGE 2
Directions NOTE: This kit may be used for bathtubs, tile, wall surrounds, sinks, & more! STEP 1: Clear the tub of all personal items. Make sure there is positive air-flow and adequate ventilation in the work areas at all times. CLEAN TUB THOROUGHLY! Scrub bathtub with Ajax® or Comet® while focusing on areas with heavy soap buildup - use steel wool if needed. NOTE: ANY soap residue present may prevent bonding and cause failure.
PAGE 3
NOTE: Any repairs, if needed, should be completed prior to using the tack cloth. STEP 6: Using the tack cloth provided, rub over the entire surface in an effort to remove all foreign materials from the areas. The bathtub or wall surfaces should now be smooth, completely cleared, and ready to be rolled with the refinishing product. CAUTION: In the following steps - proper ventilation, gloves, and eye wear are strongly recommended. Use all paint products with caution.
PAGE 4
OPTIONAL: A second coat may be applied right away following the same rolling pattern. Ensure that you do not lean on wet surfaces. NOTE: Dispose of all unused materials and debris immediately after completing the project. Obey all state, city, & town codes for proper paint disposal. See "Safety" section at the end of these instructions for more details. STEP 10: After allowing the coating to set for 24 hours, carefully remove the tape by pulling at a 45 degree angle.
PAGE 5
Tub, Tile, Wall Surround, & Sink Refinishing Kit BATHTUB CARE TIPS Congratulations! Your bathtub or bath fixture has just been resurfaced with the finest product in the tub and tile coating industry. Follow these care tips to maintain the beauty of your surface. Treat as if this is a brand new bathtub; remove excess water and wipe dry after each use. Always be certain faucets are tightly closed and the shower pipe is drained after each use.
PAGE 6
LIMITED WARRANTY Tub Refinishing, Inc. DBA Munro Products as follows; this warranty is in lieu of all other written or unwritten, expressed, or implied warranties, and Tub Refinishing, Inc. DBA Munro Products expressly disclaims any warranty of merchantability or fitness for a particular purpose. The buyer assumes all risks whatsoever as to the use of the material. Keep away from children, animals, or persons that are sensitive to paint or fumes.