SDS

Page 4 of 8
Section 06 - Accidental Release Measures
Leak / Spill................….……………... Wear appropriate personal protective equipment. Scoop up or vacuum
spilled material and place in appropriate closed container. Flush area with
water to remove any trace residue. Prevent material from entering
sewers.
Deactivating Materials...……….…... Not available
Section 07 - Handling and Storage
Handling Procedures.......…………... Avoid contact with eyes, skin and clothing. Avoid breathing in dust. Use
with adequate ventilation. Wash thoroughly after handling. Potentially
deadly carbon monoxide gas can form in enclosed area or tanks when
alkaline products contain materials that contain sugars. Do not enter such
areas until they have been well ventilated and carbon monoxide and
oxygen levels have been determined safe. Continue to monitor
atmosphere while personnel are in enclosure. Empty containers may
contain hazardous product residues.
Storage Requirements......……...….. Store in a cool, dry, well-ventilated area. Keep containers tightly closed.
Section 08 - Personal Protection and Exposure Controls
Protective Equipment
Eyes.………………………….………... Chemical goggles, full-face shield, or a full-face respirator is to be worn at
all times when product is handled. Contact lenses should not be worn;
they may contribute to severe eye injury.
Respiratory………………………….... NIOSH-approved respirator for dust should be worn, if needed.
Gloves………………………………..... Impervious gloves of chemically resistant material (rubber or PVC) should
be worn at all times. Wash contaminated clothing and dry thoroughly
before reuse.
Clothing………………………..…….... Body suits, aprons, and/or coveralls of chemical resistant material should
be worn at all times. Wash contaminated clothing and dry thoroughly
before reuse.
Footwear……………………………..... No special footwear is required other than what is mandated at place of
work.
Engineering Controls