SDS

Safety Data Sheet
1. Identification
1.1 Product Name
BATHWORKS
®
EZ Etch
1.2 Distributor
Munro Products
9150 Clarence Center Road
Clarence Center, NY 14032
[phone]
www.bath-works.net
1.3 Emergency Information
CHEMTREC®
[phone]
Poison Control Center
[phone]
2. Hazard Identification
2.1 Classification of the mixture
Skin Corrosion:
Category 2
Eye Irritant:
Category 2A
Acute Toxicity-Oral
Category 4
2.2 Label Elements
WARNING: Harmful if swallowed. Causes skin irritation. Causes eye irritation
2.3 Precautionary Statements
P102: Keep out of reach of children.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash hands thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection
P301 + P312: IF SWALLOWED: Call a Poison Control Center or physician if you feel unwell.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
3. Ingredient Composition
3.1 Ingredient Name
3.2 CAS #
3.3 Percent
Water
7732-18-5
6%
Corn Syrup
8029-43-4
29%
Ammonium Biflourode
1341-49-7
34%
Wheat Flour
130498-22-5
14%
Sodium carboxymethyl cellulose
9004-32-4
14%
Sodium Sulfate
7757-82-6
1.4%
Tritanium Dioxide
13463-67-7
1.4%
Ci 42053
2353-45-9
0.2%
4. First Aid
4.1 Eyes
Immediately flush with plenty of water for at least 30 minutes. Consult a
physician.
4.2 Skin
Flush with water for at least 15 minutes. Use alkaline soap. If irritation
occurs immerse and soak affected area in .13% iced aqueous Zephitian
Chloride solution for 30-60 minutes.
4.3 Inhilation
Remove to fresh air. If difficult breathing, give oxygen.