SDS

Safety Data Sheet
1. Identification
1.1 Product Name
BATHWORKS
®
EZ Etch
1.2 Distributor
Munro Products
9150 Clarence Center Road
Clarence Center, NY 14032
[phone]
www.bath-works.net
1.3 Emergency Information
CHEMTREC®
[phone]
Poison Control Center
[phone]
2. Hazard Identification
2.1 Classification of the mixture
Skin Corrosion:
Category 2
Eye Irritant:
Category 2B
2.2 Label Elements
WARNING: Causes eye and skin irritation. Harmful if swallowed. Wear protective gloves; Wash thoroughly after
handling. Wash with water for at least 15 minutes. Use alkaline soap. Take off contaminated clothing and wash it
before reuse. Consult a physician if irritation persists
3. Ingredient Composition
3.1 Ingredient Name
3.2 CAS #
3.3 Percent
Water
7732-18-5
6%
Corn Syrup
8029-43-4
29%
Ammonium Biflourode
1341-49-7
34%
Wheat Flour
130498-22-5
14%
Sodium Sulfate
7757-82-6
1.4%
Tritanium Dioxide
13463-67-7
1.4%
4. First Aid
4.1 Eyes
Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Consult a physician if eye irritation
persists.
4.2 Skin
Flush with water for at least 15 minutes. Use alkaline soap. Take off
contaminated clothing and wash it before reuse. Consult a physician if
irritation persists. Soak affected area in .13% iced aqueous Zephiran
Chloride solution for 30-60 minutes.
4.3 Inhilation
Remove to fresh air. If difficult breathing, give oxygen.
4.4 Swallowing
DO NOT INDUCE VOMITING. Give large amounts of water.
5. Firefighting
5.1 Flash Point
None
5.2 Extinguishing Media
Not combustible. Use extinguishing method suitable for surrounding fire.
5.3 Special Fire Fighting Procedures
None
5.4 Fire and Explosion Hazards
Heating may release toxic corrosive gases.