Batronix LEADING PROGRAMMING AND MEASUREMENT SOLUTIONS Batronix Professional Programmer Series Batronix I Handelsweg 16 I Batronix Professional Programmer Series 24211 Preetz | Germany | www.batronix.
Batronix LEADING PROGRAMMING AND MEASUREMENT SOLUTIONS The Batronix Professional Programmer Series offers an exceptionally flexible, simple to use and fast set of programmers that support a broad range of chips. With a height of only 2.5 cm the enclosures are very practical and are noted for their design and anodized die-cast aluminum construction. These programming devices are your first choice even in a harsh usage environment.
Batronix LEADING PROGRAMMING AND MEASUREMENT SOLUTIONS sUPPOrted deViCes BX32-ii BX32P-ii BX40-ii BX48-ii BX32-ii BX32P-ii BX40-ii BX48-ii Very old NMOS EPROM (VPP > 15 V) NMOS EPROM (VPP <= 15 V) CMOS EPROM, EEPROM, LPC, Flash, other LPC, FWH, Firmware Hubs Serial EEPROMs 16 Bit EPROM and FLASH PLD, SPLD, EPLD, GAL, PALCE Microcontroller, MCU, PIC NAND FLASH In-System Programming (ISP) via Batronix Universal ISP Adapter Ultra Low Voltage Chips (1.
Batronix Hardware Details Leading programming and measurement solutions BX32-II Interface ZIF-socket BX40-II BX48-II USB 2.0 Full Speed (12 Mb/s) 32 Pins 32 Pins “Low Cost” Pin driver Chip Data Transfer Rate BX32P-II USB 2.0 High Speed (480 Mb/s) 40 Pins “High Quality” 48 Pins “High Quality” “High Quality” Specialized for memory chips Universal 1. Parallel Flash chip 2. Serial SPI chip up to up to up to up to 6.2 Mb/s - 6.2 Mb/s 0.6 Mb/s 6.2 Mb/s 0.6 Mb/s 51.2 Mb/s 10.
Batronix LEADING PROGRAMMING AND MEASUREMENT SOLUTIONS Prog-Express Software All Batronix BX-programmers can be easily controlled using the modern and intuitive Prog-Express software. Chips inserted in the programmer can be detected automatically by the software and programming a chip from a file or copying an existing chip is done with a few mouse-clicks.
Batronix LEADING PROGRAMMING AND MEASUREMENT SOLUTIONS Universal Gang Programmer BX448 Baplexo I and BX848 Baplexo II The Batronix BX448 and BX848 are extremely fast, reliable, convenient and easy to use universal gang programmers. They are based on the latest BX48 Batego II technology and offering chip data transfer rates up to 51.2 Mb/s per socket. Asynchronous and concurrent operation allows beginning programming immediately upon insertion of a chip.