Datasheet

Batronix Professional Programmer Series
Batronix I Handelsweg 16 I 24211 Preetz | Germany | www.batronix.com
Leading programming and measurement soLutions
Batronix
Hardware details BX32-ii BX32P-ii BX40-ii BX48-ii
Interface USB 2.0 Full Speed (12 Mb/s) USB 2.0 High
Speed (480 Mb/s)
ZIF-socket 32 Pins
“Low Cost”
32 Pins
“High Quality”
40 Pins
“High Quality”
48 Pins
“High Quality”
Pin driver Specialized for memory chips Universal
Chip Data Transfer Rate
1. Parallel Flash chip
2. Serial SPI chip
up to
6.2 Mb/s
-
up to
6.2 Mb/s
0.6 Mb/s
up to
6.2 Mb/s
0.6 Mb/s
up to
51.2 Mb/s
10.7 Mb/s
Low voltage support - downto 3.0 V downto 3.0 V downto 0.9 V
Dimensions
9x8.5x2.5 cm
(3.5”x3.3”x1”)
9x8.5x2.5 cm
(3.5”x3.3”x1”)
9x8.5x2.5 cm
(3.5”x3.3”x1”)
13.7x8.5x2.5 cm
(5.4”x3.3”x1”)
Weight without accessories
and packaging
155 g
(0.34 lb)
162 g
(0.36 lb)
167 g
(0.37 lb)
257 g
(0.57 lb)
Weight with accessories 349 g
(0.77 lb)
355 g
(0.78 lb)
360 g
(0.79 lb)
451 g
(1.00 lb)
Warranty 5 Years 5 Years 5 Years 5 Years
BX48 Batego Pin Drivers
A completely new chip was developed specifically for the pin control functions of the BX48. This new pin
driver ASIC provides previously inconceivable performance and flexibility.
The BX48 is the first programmer in the world which supports extremely low power supply ICs according to
JEDEC Norm JESD8-14A.01. Chips which meet this standard have to be powered with a supply voltage of
1.0 Volt with a maximum tolerance of 100 mV.
Each of all 48 pins can be used independent and flexible:
• Four supply and programming voltages from 0.9 V up with 10 mV resolution!
• Logic-Output
• Logic-Input
• High speed serial interface
• Analog Input (A/D measurements with 10 mV resolution!)
• Analog Output (D/A voltage output with 10 mV resolution!)
• Six switchable pullup+pulldown resistors on VPP, VCC and GND
• Adjustable clock frequencies up to 24.5 MHz
• Ground