Datasheet

Batronix Professional Programmer Series
Batronix I Lise-Meitner-Str. 1-7 I 24223 Schwentinental | Germany | www.batronix.com
LEADING PROGRAMMING AND MEASUREMENT SOLUTIONS
Batronix
Supported deviceS BX32 BX32p BX40 BX48
Very old NMOS EPROM (VPP > 15 V)
NMOS EPROM (VPP <= 15 V)
CMOS EPROM, EEPROM, LPC, Flash, other
LPC, FWH, Firmware Hubs
SEEPROM
16 Bit EPROM and FLASH
Microcontroller
PLD, SPLD, EPLD, GAL, PALCE
NAND FLASH
Ultra Low Voltage Chips (1.0 V)
Chip updates on customer request
Complete chip support list
Security- and teSt FunctionS BX32 BX32p BX40 BX48
DEVICE SELF TEST AND CALIBRATION
The programmer verifies its power supply and programming voltage
regulation on each pin and can calibrate them.
PIN CONTACT TEST
The programmer checks if a chip was inserted correctly and every pin is
connected.
CHIP ID TEST
The chip signature (if available) is verified before accessing the chip.
VOLTAGE MONITORING
The supply and programming voltages at the connected chip are
checked.
CURRENT MONITORING
During any chip action the current is checked continuously and all con-
nections will be disconnected if it exceeds the maximum values.
DATA VERIFY UNDER DEVIANT VOLTAGES
After the programming process the chip data can be verified several
times using minimum, nominal and maximum supply voltage. Therewith
a durable data integrity is guaranteed.
CHECKSUM CALCULATION (CHECKSUM, EPT-1 CRC16, CRC-32)
The software is able to calculate and compare many different types of
checksums.