Installation Instructions

W
WI-FI
To connect to a wireless network, or change the network credentials, follow these instructions:
1. Pres
s and hold the Puck screen for 6 seconds (orange lights will begin flashing)
2. Open the Wi-Fi settings on your mobile device and select the Lockdown network
a) The password is: lockdown
3. Once connected, open a web browser and navigate to Lockdown.com
a) If you
are using an iPhone, this page should automatically load
4. Enter your Wi-Fi Network Name and Password (Device Name can remain empty)
5. The Puck will chirp when it is successfully connected
a) The webpage may show “This page isn’t workin
g”. This is normal and not an error.
6. Navigate to https://uat.btibrands.app/lockdown/app
and you’re fully Pucked
Battenfeld Technologies Inc.