Specification

08310-1 revised 3/8/14
SECTION 08310
ACCESS DOORS AND FRAMES
PART 1 GENERAL
1.1 RELATED SECTIONS
A. Section 06100 - Rough Carpentry: Roof framing and opening support.
1.2 SUBMITTALS
A. Submit under provisions of Section 01300.
B. [ Product Data
]: Manufacturer's data sheets, including:
1. Brochures.
2. Installation Instructions.
1.3 DELIVERY, STORAGE, AND HANDLING
A. Store attic access door hatch in manufacturer's unopened packaging until ready for
installation.
B. Store attic access door hatch until installation inside under cover in dry area out of
direct sunlight.
1.4 WARRANTY
A. Limited Warranty: One year against defective material and workmanship, covering
parts only, no labor or freight. Defective parts, if deemed so by the manufacturer, will
be replaced at no charge, freight excluded, upon inspection at manufacturer's plant
which warrants same.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer:
Battic Door Energy Conservation Products.
Box 15, Mansfield, MA 02048-0015 U.S.A.
Phone: [phone]; Fax: [phone]
e: info@batticdoor,com
; i: www.batticdoor.com
2.2 FABRICATION
A. Manufacture each access panel assembly as an integral unit ready for installation.
2.3 OVERVIEW OF PRODUCT
A. Model 22 x 30 Attic Access Door System is an R-42 insulated and triple-gasketed
door that installs in minutes and provides an air sealed, insulated access opening to
residential attic space. Door is provided with wood trim attached to the wood frame.
The door face and trim are pre-finished satin white and the unit is shipped ready to
install. Exceeds 2009, 2012 and 2015 IBC and IECC requirements.