User Manual

User’s Guide Configuring your Computers
166
4. From the left-hand menu, click on Save.
DHCP Server Configuration - Set DNS Manually
1. From the head Services menu, click on DNS -> DNS
Server.
2. From check ratio, click on Attain Set DNS Manually.
3. Enter the IP Address of DNS.
4. Click on Apply Changes.
Field Description
Attain DNS
Automatically
Select this item if you want to use the DNS servers
obtained by the WAN interface via the auto-
configuration mechanism.
Set DNS
Manually
Select this item to configure up to three DNS IP
addresses.
Function Button Description
Apply Changes
Set new DNS relay configuration. New parameters will
take effect after save into flash memory and reboot the
system. See section “Admin” for save details.
Reset Selected Discard your changes.