User Manual

User’s Guide Configuring your Computers

5. From the left-hand LAN menu, click on LAN.

6. Type a new IP Address and Subnet Mask.

7. Click Apply Changes.

8. Please click 10.0.0.2 to continue configuration.

9. The primary IP address is being changed to 10.0.0.2

netmask 255.255.255.0. Then please go to http://10.0.0.2 to

continue. Your browser communicates with the web server

via the LAN connection, and changing the IP address may

disrupt this.

You may also need to renew your DHCP lease:

Windows 95/98

a. Select Run... from the Start menu.

b. Enter winipcfg and click OK.

c. Select your ethernet adaptor from the pull-down menu

d. Click Release All and then Renew All.

e. Exit the winipcfg dialog.

Windows NT/Windows 2000/Windows XP

a. Bring up a command window.

b. Type ipconfig /release in the command window.

c. Type ipconfig /renew.

d. Type exit to close the command window.

Linux

a. Bring up a shell.

b. Type pump -r to release the lease.

c. Type pump to renew the lease.