User Manual

User’s Guide Configuring your Computers

DHCP Relay Configuration

1. From the left-hand LAN menu, click on DHCP Settings.

2. From Services check ratio, click on DHCP Relay Mode.

3. Type DHCP server IP Addresses for DHCP Relay.

4. Click on Apply Changes.

5. From the left-hand menu, click on Save.

Field Description

DHCP Server

Address

Specify the IP address of your ISP’s DHCP server.

Requests for IP information from your LAN will be

passed to the default gateway, which should route the

request appropriately.

Function Button Description

Apply Changes

Set new DHCP server configuration. New parameters

will take effect after save into flash memory and reboot

the system. See section “Admin” for save details.