2.0 Channel Soundbar MODEL: ACSB-1022-B, ACSB-1022-C User Manual AFTER SALES SUPPORT AUS 1300 002 534 tempo.
Welcome Congratulations on your purchase! This manual tells you all you need to know about using your new BAUHN® product. Please take special note of any important safety and usage information presented with the symbol. All products brought to you by BAUHN® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty.
Contents Welcome Unpack and Prepare What's in the box Wall Mount Installation Kit Important Tips Installation - Free Standing 2 4 4 5 5 6 Operation 16 General Operation 16 Input Modes 17 Function Display 17 Bluetooth® Pairing Bluetooth® Devices ® Bluetooth Playback 18 18 19 Installation - Wall Mounted 7 Wall Mounting Instructions 8 Troubleshooting 20 Connect to Power 9 Specifications 22 Compliance and Responsible Disposal 23 Controls and Connections 10 Get to know your Soundbar 1
Unpack and Prepare What's in the box Before setting up your new Soundbar, check you have everything: A. 2.0 Channel Soundbar B. Remote Control C. AAA Activ Energy Batteries D. 3.5mm to 3.5mm Audio Cable E. Optical Audio Cable F. AC Power Adaptor G. Warranty Certificate H. General Safety Warnings I. User Manual J. Quick Start Guide K. Wall Mount Installation Kit (See next page for more information.) You will need: • Phillips-head screwdriver and a drill (for wall mount installation.
Wall Mount Installation Kit The illustration below shows the contents of the wall mount installation kit. These are the parts you will need when wall mounting the soundbar. Some parts are not shown at the same scale. Note: If you choose to wall mount the soundbar, you will find that a standard HDMI cable will not fit properly. Please contact our After Sales Support on 1300 002 534 and we will provide you with a HDMI adaptor. 4 1. Plastic anchor (4) 2. Long screw (4) 1 5 2 3. Short screw (8) 4.
Installation - Free Standing This soundbar can sit free-standing on a surface, or it can be mounted to a wall. Place on a secure, flat surface. Make sure the soundbar is standing on its rubber pads (on the left and right sides of the soundbar) and no other area of the bottom of the soundbar is touching the surface.
Installation - Wall Mounted Wall mounting instructions are on the following pages. Wall mounted • Wall mounted installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage! If you intend to install this product yourself, you must check for installations such as electrical wiring and plumbing, which may be hidden inside or behind the wall.
Wall Mounting Instructions 1 Fix the supplied wall-mounting brackets to the bracket fixing holes on the back of the soundbar with the supplied short screws. Affix the brackets as shown in the illustration (left). 2 Use a pencil to make 4 drill hole marks on the wall for the adaptors. Make sure the marks are level before drilling. Use a 6mm bit and power drill (not supplied) to drill holes on the marks.
3 Use the supplied screws and plastic anchors to fix the wall mount adaptors onto the drilled hole marks. Once fixed to the wall, hang the soundbar onto the wall mount adaptors. Connect to Power Make sure the power switch is switched off at the power outlet until you have finished connecting your cables.
Controls and Connections Get to know your Soundbar LED display Front view Remote control sensor Buttons on the Soundbar 1 2 3 1. 2. 3. Right Side 10 | CONTROLS AND CONNECTIONS : Decrease the volume level. (POWER/SOURCE): Press to turn on. Press again to select your preferred input source. Press and hold to put into Standby mode. : Increase the volume level. See next page for more info on the connections.
Rear Ports on the Soundbar 1 2 3 4 5 6 1 USB STORAGE Plug in a USB stick to play media files stored on your USB storage device. 2 AUX SOUND Use the supplied 3.5mm to 3.5mm audio cable to connect the headphone socket of the connected audio device, such as a media player, to the AUX socket on the soundbar. 3 COAXIAL SOUND Connect a Coaxial cable (not included) to the COAXIAL OUT socket of your device (e.g. TV, DVD player) and the COAXIAL socket on the soundbar.
Rear Ports on the Soundbar HDMI (ARC) To use the ARC function, make sure the soundbar's HDMI (ARC) socket is connected via a HDMI cable (not included) to the HDMI (ARC) socket of your ARC compliant TV. Then just use your TV's remote control to adjust the volume output (VOL +/– and MUTE) of the connected audio device. In the TV settings menu, turn on the ARC and CEC function (when CEC is turned on, the sound bar will turn on/off automatically when the TV is turned on/off).
Remote Control Setup Insert two AAA size batteries according to the polarity markings (+ / -) inside the compartment. Make sure the batteries are correctly aligned and properly pushed into place. 1 AAA size batteries included Precautions When Using Batteries 2 • Do not use old and new batteries together. • Do not use different types of batteries (e.g. Manganese and Alkaline batteries) together. • Remove the batteries from the remote if you do not intend to use it for a long time.
Using the Remote Control To use the remote control, point it towards the remote control sensor at the front of the soundbar. The remote control will not operate if its path is blocked. The remote control has a range of up to about 6 metres from the soundbar at an angle of up to 30 degrees to either side of the sensor, as illustrated below. Remote Control Use • Do not drop, step on or otherwise impact the remote control. This may damage the parts or lead to malfunction.
Remote Control Overview MODE (POWER): Switch the soundbar on or standby : Mute the sound MODE: Switch between the input sources : Increase the volume level : Skip to the previous track : Decrease the volume level TREBLE - : Decrease the treble : Skip to the next track : Start or pause playback - + BASS- BASS+ EQ TREBLE + : Increase the treble BASS + : Increase the bass EQ : Change the equaliser preset BASS -: Decrease the bass Tips Press and hold the button for 3 seconds to un-pair the connecte
Operation General Operation Function Action Turn the Soundbar On Press the (POWER/SOURCE) button on the right side of the soundbar, or press the (POWER) button on the remote control. Turn the Soundbar Off Press and hold the (POWER/ SOURCE) button on the soundbar or press the (POWER) button on the remote control.
Input Modes Input Function Display Display Function Display HDMI ARC Volume to Bluetooth® Mute "- - - -" will flash on LED display Optical Treble (-5 to 5) Coaxial Bass (-5 to 5) AUX EQ News USB EQ Music Note: The LED display will turn off around 5 minutes without operation.
Bluetooth® You can listen to tracks from a media device if connected to the soundbar via Bluetooth® wireless technology. ® Pairing Bluetooth Devices The first time you use your Bluetooth® device with the soundbar, you will need to pair them with one another. Activate Bluetooth® on your compatible device, and set it to search for compatible devices.
Bluetooth® Playback Function Action Increase the Volume Press the + button on the soundbar or the button on the remote control. Decrease the Volume Press the - button on the soundbar or the button on the remote control. Play/Pause Press the button on the remote control. Rewind/Skip Press the / Un-pair a Bluetooth® device Press and hold the buttons on the remote control to rewind/skip tracks. button on the remote control for 2 seconds.
Troubleshooting If you have problems with the soundbar, check below for advice. If you don't find a solution here, contact After Sales Support on 1300 002 534. Problem Solution • Ensure that the AC power adaptor is properly connected. No power • Ensure that there is power at the DC outlet. • Press the (POWER/SOURCE) button on the soundbar or the soundbar on. (POWER) button on the remote control to turn • Use the remote control closer to the soundbar.
Problem Solution • Make sure the input source is set to ARC; the LED will display "HD". • Make sure your TV or external device supports ARC function and connect the HDMI cable to the ARC port of the TV or external device. No sound in HDMI ARC mode • In the TV or external device setting menu, turn on the ARC function and the CEC function. • In the TV or external device setting menu, find the audio output settings and change the audio output mode to 'PCM' mode (instead of Auto, RAW, etc.
Specifications Power supply (AC power adaptor) AC 100-240V, 50/60 Hz Power input (soundbar) 20V/1.8A Power consumption 36W Max. Speaker output 2 x 20W Remote control operation range – distance, angle 6 metres, 30 degrees (either side of sensor) Bluetooth® pairing operation range – distance Up to 10 metres 1300 002 534 Bluetooth® pairing name BAUHN ACSB-1022 tempo.org/support Bluetooth® pairing password 0000 Distributed by Tempo (Aust) Pty Ltd, Bluetooth® version 5.
Compliance and Responsible Disposal Packaging The packaging of your product has been selected from environmentally friendly materials and can usually be recycled. Please ensure these are disposed of correctly. Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all packaging materials are out of reach and are safely disposed of. Please recycle these materials rather than throwing them away.
Warranty Information The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour.
Repair and Refurbished Goods or Parts Notice Unfortunately, sometimes faulty products are manufactured, which need to be returned to the supplier for repair.
Notes 26
Notes 27
Online support Visit bauhn.com.au for software updates to keep your soundbar up-to-date, as well as the latest User Manual for information on the updated features. tempo.org/support Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, please contact our After Sales Support Centre on 1300 002 534.