Instruction manual

After Sales Support TEL: [phone]
3. CONFIRM YOU ARE RECORDING
From the normal viewing screen (not the timer list) do the following.
a. If you are confirming it is only ONE station recording, press the Info. button once.
The information bar will have a small red dot indicating a Rec. is in progress on the
channel you are viewing. A small two line display in the top right hand corner of
the screen should already have appeared briefly if you press record whilst
watching TV.
b. If there are TWO stations recording, press the Info. button once, then when you
press STOP a box will appear in the top right hand corner of the screen. The
information bar will have a small red dot indicating a Rec. is in progress on the
channel you are viewing. A two line display in the top right hand corner of the
screen will show two channel numbers and a changing display showing the
number of minutes already recorded on each recording. Press Exit to remove the
box from the screen or just wait and it will close on its own.
4. ASPECT RATIO
With some large 4:3 CRT (Cathode Ray Tube) older style TV’s, the aspect button first
appeared to be missing one important selection.
It does 4:3, and 16:9, but seemed to be missing 4:3 centre cut (or zoom) for those
annoying older American 4:3 shows being shown in 4:3 in a 16:9 format. (Where you
end up with a tiny little picture with big black bars on all 4 sides).
In the menu, under “Play Settings” a selection for “AR Conversion” that toggles
between Letterbox, Pan Scan , and a few others. This is in addition to the 4:3 and 16:9
selection under the video settings in the menu. Pressing the Green button, does
the same thing. Combining the Aspect button, and the Green button, eventually
gives all the options.
5. CONFIRMING BOTH TUNERS ARE WORKING
1. Record 2 channels from different DataStreams at once such as Ch7HD and Ch9HD
and replay the recordings. ABC1 and ABC2 will not confirm.
2. Record any channel and then change channels and go through all of them to make
sure you can see all channels.
3. See Section 3.CONFIRM YOU ARE RECORDING.
Any of these methods will confirm that both tuners are working.
6. HINT PAGES