Instruction manual
After Sales Support TEL: 1300 766 659 6
Front View – Display and Controls
Front Panel Display
1.
Front panel window displays information concerning current operation such as
Starting UP (Good),
CH number (eg. C009).
2.
The LEDs light up when power on and the PVR is operating according to the table
below.
3.
The green LED
lights up when the channel is locked in.
4.
When power is turned off with the power button, while the blue and green LEDS
are both on, then the red LED
is lit up briefly and then goes out.
5.
There is
NO
front panel display to indicate a Recording state whilst the PVR is in
NORMAL STATE.
Power State
No Timers
Set
Timers
Set
PVR
Recording
After
Recording
After Recording
display on TV
Normal State
Yes
Standby
No
OFF Front Switch
No Display
No Display
N.A.
N.A.
No
1. POWER Button
Turns the receiver’s power on or off.
2. Menu Button (MENU)
Press to display the Main Menu or to exit from the menu.
3. Volume Left/Right Button (/)
Moves the cursor left/right when in the menu or adjusts the volume
level in the
normal state. (Watching TV)
4. Channel Up/Down Button (/)
Moves the cursor up/down when in the menu or changes the current
program to the
previous/next channel in the normal state. (Watching TV)
5. OK Button (OK)
Press to select the item in the menu or to list the TV/Radio channels.
6. Infrared Remote Sensor (IR)
A hidden sensor senses infrared signal from the remote control.
HIGH-DEFINITION PERSONAL VIDEO RECORDER - PVR