Instruction manual

14
After Sales Support
Telephone: [phone]
Email: [e-mail]
Basic Operations
Tuning Channels
You have two options for adding new channels, automatically or manually.
Auto Search
1. Press MENU to open the Main Menu.
2. Press the / arrow keys to select Installation, then press to select Auto
Search.
3. Press OK to start the auto search.
The unit will now automatically search for and add DTV channels.
When nished, the rst channel will be displayed.
Power On/O
Press the button on the remote control (or at the front of the AS-PVR1000R) to
turn on the power to the unit. The blue standby light will extinguish and the LCD
will display the current mode.
To turn the unit o, press the button. The unit will switch to standby mode after
10 seconds and the button at the front of the unit will illuminate in blue.
• If you press the button while recording a program, the following choices will
be displayed.
Yes: Recording will be stopped and the unit will enter standby mode after
10 seconds.
No: The unit will switch to semi-standby mode: recording will continue, but
video and audio output will stop. The LCD will display REC. Press the button
again to wake the unit.
Cancel : The unit will remain on and continue recording.
• When in standby mode, and a timer recording is scheduled, the unit will turn
on automatically and enter semi-standby mode. After recording is completed,
the unit will enter standby mode.