Setup and user guide

ManualsBrandsBauknecht ManualsDishwashersBCIO 3O33 DELS

DAILY REFERENCE

GUIDE

Before using the appliance carefully read Health and Safety guide.

APPLIANCE

PRODUCT DESCRIPTION

CONTROL PANEL

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.

In order to receive a more complete assistance, please

www.bauknecht.eu/register

You can download the Safety Instructions and the

Use and Care Guide, by visiting our website

docs.bauknecht.eu and following

the Instructions on the back of this booklet.

1. Upper rack

2. Cutlery rack

3. Foldable aps

4. Upper rack height adjuster

5. Upper spray arm

6. Lower rack

7. Power Clean® support

8. Lower spray arm

9. Filter Assembly

10. Salt reservoir

11. Detergent and Rinse Aid dispensers

12. Rating plate

13. Control panel

0000 000 00000

Service:

1 2 3

5 6 7

8 9 10 11 12 13

1. On-O/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Delay indicator light

7. Display

8. Multizone indicator light

9. Delay button

10. Multizone button

11. Turbo button with indicator light

12. Power Clean® button with indicator light

13. Tablet (Tab) button with indicator light

Summary of content (8 pages)

PAGE 1
EN DAILY REFERENCE GUIDE THANK YOU FOR BUYING A BAUKNECHT PRODUCT. In order to receive a more complete assistance, please register your appliance on: www.bauknecht.eu/register You can download the Safety Instructions and the Use and Care Guide, by visiting our website docs.bauknecht.eu and following the Instructions on the back of this booklet. Before using the appliance carefully read Health and Safety guide. PRODUCT DESCRIPTION APPLIANCE 2 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
PAGE 2
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE After installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack. FILLING THE SALT RESERVOIR The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components. • It is important that the salt reservoir be never empty. • It is important to set the water hardness.
PAGE 3
EN Drying PROGRAMS TABLE Program Available options *) Detergent container Tub B Duration of wash program (h:min)**) Water consumption (litres/cycle) Energy consumption (kWh/cycle) 1. Eco 50° 4:00 9,5 0,83 2. Sensor 5060° 1:25 - 3:00 7 - 14 0,9 - 1,40 3. 1h Wash&Dry 55° - 1:00 10,5 1,20 4. Intensive 65° - 2:50 16,0 1,60 5. Daily 50° - 1:30 13,0 1,15 6. Good Night 50° - 3:30 15,0 1,15 7. Express 30’ 50° - 0:30 9,0 0,55 8.
PAGE 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. DELAY The start time of the program may be delayed for a period of time between 1 and 12 hours. 1.
PAGE 5
EN DAILY USE 1. CHECK WATER CONNECTION Check that the dishwasher is connected to the water supply and that the tap is open. 2. SWITCH ON THE DISHWASHER Open the door and press the ON/OFF button. The machine will switch off automatically during certain extended periods of inactivity, in order to minimise electricity consumption. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. 3.
PAGE 6
LOADING THE RACKS CUTLERY RACK FOLDABLE FLAPS WITH ADJUSTABLE POSITION The third rack was designed to house the cutlery. Arrange the cutlery as shown in the figure. A separate arrangement of the cutlery makes collection easier after washing and improves washing and drying performance. The side foldable flaps can be positioned at three different heights to optimize the arrangement of crockery inside the rack.
PAGE 7
EN CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the filter assembly so that the filters do not clog and that the waste water flows away correctly. The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water: to obtain the best washing results, you need to keep them clean. The dishwasher must not be used without filters or if the filter is loose.
PAGE 8
TROUBLESHOOTING Your dishwasher may not work properly. Before contacting the Service Centre check if the problem can be solved by going through the following list. PROBLEMS POSSIBLE CAUSES SOLUTIONS The dishwasher won’t start or does not respond to commands. The appliance has not been plugged in properly. Power outage. Insert the plug into the socket. The dishwasher door is not closed. Vigorously push the door until you hear the “click”. It does not respond to commands.