Setup and user guide

5
EN
DAILY USE
1. SELECT A FUNCTION
When the oven is o, only the time is shown on the
display. Press and hold
to switch the oven on.
Turn the knob to view the main functions available on
the left-hand display. Select one and press
.
To select a sub-function (where available), select the
main function and then press
to conrm and go to
the function menu.
Turn the knob to view the sub-functions available
on the right-hand display. Select one and press
to
conrm.
2. SET THE FUNCTION
After having selected the function you require, you can
change its settings.
The display will show the settings that can be changed
in sequence.
TEMPERATURE/GRILL LEVEL
When the °C/°F icon ashes on the display, turn the
knob to change the value, then press
to conrm and
continue with altering the settings for all values that
can be regulated.
You can also set the grill level (3 = high, 2 = medium, 1 =
low) at the same time.
Please note: Once the function has been activated, you can
change the temperature or the grill level by pressing
or by
turning the knob directly.
DURATION
When the icon ashes on the display, use the
adjustment knob to set the cooking time you require
and then press
to conrm.
You do not have to set the cooking time if you want
to manage cooking manually: Press
to conrm and
activate the function. In this case, you cannot set the
end cooking time by programming a delayed start.
Please note: You can adjust the cooking time that has been
set during cooking by pressing
: Turn the knob to change
the time, then press
to conrm.
SET THE COOKING END TIME
DELAYED START
In many functions, once you have set a cooking time
you can delay starting the function by programming its
end time. Where it is possible to change the end time,
the display will show the time the function set to nish
while the
icon ashes.
If necessary, turn the knob to set the time you want
cooking to end, then press
to conrm and activate
the function.
Place the food in the oven and close the door: The
function will start automatically after the period of time
that has been calculated in order for cooking to nish at
the time you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase. The oven will reach the
temperature you require gradually, meaning that cooking
times will be slightly longer than those listed in the cooking
table.
During the waiting time, you can use the knob to adjust the
programmed end time.
Press
or to change the temperature and cooking time
settings: press
to conrm when nished.
3. ACTIVATE THE FUNCTION
When the values correspond with the desired settings,
press
to activate the function.
Press and hold
to stop the active function at any time.