Benutzer- und Wartungshandbuch EN User and maintenance manual Manuel d’utilisation et d’entretien IT Manuale d’uso e manutenzione
IMPORTANT SAFETY INSTRUCTIONS These instructions shall also be available on website: www.whirlpool.eu YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others.
- If the surface of the induction plate is cracked, do not use it and switch off the appliance to avoid the possibility of electric shock (only for models with induction function). - Do not touch the appliance with any wet part of the body and do not operate it when barefoot. - This appliance is designed solely for use as a domestic appliance for cooking food. No other type of use is permitted (e.g.: heating rooms).
- Do not use containers made of synthetic materials. - Overheated oils and fats catch fire easily. Always remain vigilant when cooking foods rich in fat and oil. - Never leave the appliance unattended during food drying. - If alcoholic beverages are used when cooking foods (e.g. rum, cognac, wine), remember that alcohol evaporates at high temperatures. As a result, there is a risk that vapours released by the alcohol may catch fire upon coming into contact with the electrical heating element.
GENERAL RECOMMENDATIONS Before use: - Remove cardboard protection pieces, protective film and adhesive labels from accessories. Remove the accessories from the oven and heat it at 200°C for about an hour to eliminate the smell and fumes from the insulating materials and protective grease. During use: - Do not place heavy objects on the door as they could damage it. Do not cling to the door or hang anything from the handle. Do not cover the inside of the oven with aluminium foil.
AFTER-SALES SERVICE Before calling the After-Sales Service: 1. See if you can solve the problem yourself with the help of the suggestions given in the “Troubleshooting guide“. 2. Switch the appliance off and back on again it to see if the fault persists. If after the above checks the fault still occurs, get in touch with the nearest After-sales Service.
MAINTENANCE - WARNING Use safety gloves. Ensure the oven is cold before carrying out the following operations. Disconnect the oven from the power supply. REMOVING THE DOOR To remove the door: 1. 2. 3. Open the door fully. Lift the catches and push them forwards as far as they will go (fig. 1). Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (fig. 2). To refit the door: 1. 2. 3. 4. Fig. 1 Insert the hinges in their seats. Open the door fully.
Fig. 6 Fig. 7 Fig. 8 Fig. 9 N.B.: Only use 25-40W/230V type E-14, T300°C incandescent lamps, or 20-40W/230 V type G9, T300°C halogen lamps. The lamp used in the appliance is specifically designed for electrical appliances and is not suitable for household room illumination (Commission Regulation (EC) No 244/2009). Lamps are available from our After-sales Service. IMPORTANT: If using halogen lamps, do not handle with bare hands since fingerprints can damage them.
INSTRUCTIONS FOR OVEN USE FOR ELECTRICAL CONNECTION, SEE THE PARAGRAPH ON INSTALLATION 1. Control panel 2. Upper heating element/grill 3. Cooling fan (not visible) 4. Dataplate (not to be removed) 5. Light 6. Circular heating element (not visible) 7. Fan 8. Turnspit (if present) 9. Lower heating element (not visible) 10. Door 11. Position of shelves (the number of shelves is indicated on the front of the oven) 12. Rear wall N.B.
INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN 1. 2. Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. 1). The other accessories, like the drip tray and baking tray, are inserted with the raised part on the flat section “B” facing upwards (Fig. 2). Fig. 1 Fig. 2 CONTROL PANEL DESCRIPTION ELECTRONIC PROGRAMMER Frozen Food Defrosting Keep Warm Specials: For defrosting food 1 DISPLAY 3 4 2 1. FUNCTION SELECTOR KNOB: On/off and function selector knob 2.
USING THE APPLIANCE FOR THE FIRST TIME - LANGUAGE SELECTION AND SETTING THE TIME For correct use of the oven, when it is switched on for the first time you will have to select the desired language and set the correct time. Proceed as follows: 1. Turn the “Functions” knob to any position: the display will show the list of the first three available languages. 2. Turn the “Browse” knob to scroll the list. 3. When the desired language is highlighted, press to select it.
PREHEATING THE OVEN --:-- 200°C TEMPERATURE No PREHEAT Conventional Start 200°C TEMPERATURE Yes PREHEAT TEMPERATURE --:-- No END TIME PREHEAT --:-- 200°C COOK TIME Conventional Start --:-- 200°C COOK TIME COOK TIME Conventional Start --:-- TEMPERATURE --:-- Yes PREHEAT END TIME --:-END TIME COOK TIME Conventional Start --:-END TIME If you wish to preheat the oven before inserting food, change the oven’s default selection as follows: 1.
SETTING END OF COOKING TIME / START DELAYED The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only be done once cooking time has been set. This setting is only possible when pre-heating is not required for the selected function.
To bring up your saved settings at a later date, turn the functions knob to the symbol the stored functions, then turn the Browse knob to view the desired function. Press button and then start cooking. and select one of SETTINGS 1. To change some display settings, select “SETTINGS” from the main menu by turning the “Functions” knob. 2. Confirm by pressing : the display shows which settings can be changed (language, volume of acoustic signal, display brightness, time, energy saving function). 3.
FUNCTION DESCRIPTION TABLE FUNCTION SELECTOR KNOB OFF LAMP To stop cooking and switch off the oven. To switch the oven interior light on/off. FAST PREHEATING To preheat the oven rapidly. CONVENTIONAL GRILL TURBO GRILL FORCED AIR CONVECTION BAKE To cook any kind of dish on one shelf only. Use the 3rd shelf. To cook pizza, savoury pies and sweets with liquid fillings, use the 1st or 2nd shelf. The oven does not have to be preheated.
SPECIAL DEFROST KEEP WARM RISING CONVENIENCE MAXI COOKING To speed up defrosting of food. Place food on the middle shelf. Leave food in its packaging in order to prevent it from drying out on the outside. For keeping just-cooked food hot and crisp (e.g.: meat, fried food or flans). Place food on the middle shelf. The function will not activate if the temperature in the oven is above 65°C. For optimal rising of sweet or savoury dough.
COOKING TABLE Recipe Function Pre- Shelf (from Temp.
Recipe Function Pre- Shelf (from Temp.
Recipe Sausages / Kebabs / Spare ribs / Hamburgers Function Pre- Shelf (from Temp.
Recipe Function Pre- Shelf (from Temp.
TESTED RECIPES in compliance with IEC 60350-1:2011-12 and DIN 3360-12:07:07 Recipe Function PreShelf (from Temp. heating bottom) (°C) Time (min) Accessories and notes IEC 60350-1:2011-12 § 7.5.2 - 3 170 - 1-4 150 - 3 170 - 1-4 160 - 2 170 - 1-4 160 - 2/3 185 - 1-4 175 IEC 60350-1:2011-12 § 9.2 Toast** IEC 60350-1:2011-12 § 9.
RECOMMENDED USE AND TIPS How to read the cooking table The table indicates the best function to use for any given food, to be cooked on one or more shelves at the same time. Cooking times start from the moment food is placed in the oven, excluding pre-heating (where required). Cooking temperatures and times are purely for guidance and will depend on the amount of food and type of accessory used.
Printed in Italy 02/2012 400010755846 DE GB FR Copyright Whirlpool Europe s.r.l. 2014. All rights reserved IT Bauknecht® Registered trademark/TM Trademark of Whirlpool group of companies http://www.bauknecht.
