Operation Manual

Installation
Technical information for
the installer
Oven
• After removing the oven
from its packaging, before
making the connections
place it on the polystyrene
foam base to protect it
from damage.
• Do not attempt to lift the
oven by the handle.
Lift at the sides as shown in
the figure (see arrow).
• Check that the appliance
has not been damaged in
transit.
• Oven dimensions and
kitchen unit dimensions
are shown in the figure
opposite.
• Kitchen units in contact
with the oven must be
heat resistant (80°C).
• If plastic laminates or
cement are not sufficiently
heat-resistant, warping,
bubbling or detachment of
the finish may result.
• Install the oven in the
housing, lifting it at the
sides, taking care not to
trap the wires of the
electrical supply cable.