Operation Manual

Electrical connection
• Warning: Do not
connect to the power
supply before you have
finished connecting the
oven.
• Make sure the oven is
installed and connected
to the electricity supply
by a qualified
technician in accordance
with the manufacturer's
instructions and in
compliance with local
regulations.
• The installer is
responsible for the
correct electrical
connection of the oven
and the observance of
the relative safety
regulations.
• The oven must be
connected to the
electricity supply by
means of an all-pole
disconnect switch with
minimum contact gap
of 3 mm.
• The oven must be
earthed by-law.
• Do not use multiple
plug adapters or
extension leads.
• After the oven has been
installed, the electrical
components must be
inaccessible.
• Make sure that the
voltage shown on the
rating plate is the same
as the power supply
voltage in your home.
The rating plate is on
the front edge of the
oven cavity (visible with
oven door open).