Operation Manual

61
EN
pull / sliDe The
shelf supporT
forward to
unhook them.
Clean the Shelf
supports and
cavity walls.
refiT Them by
sliding them back
on the cavity wall
hooks.
REMOVING THE SHELF SUPPORTS
Danger of elecTrical shock!!
before replacing The bulb, ensure:
ɳ The appliance is switched off.
ɳ The appliance mains cord is disconnected
ɳ The fuses is removed from the fuse box or
are switched off.
ɳ Place a cloth on the cavity bottom to pro-
tect the light bulb & glass cover.
q
Turn The glass cap anticlockwise to
unscrew.
w
remove the
seals and metal
ring and clean the glass cap.
e
replace the old bulb with a 10 W, 12 V, G4,
heat-resistant (oven) halogen bulb.
r
refiT The ring and seals to the glass cap.
t
refiT The assembly by screwing it on
clockwise.
REPLACING THE OVEN LIGHT BULB
MAINTENANCE & CLEANING
DISHWASHER UNSAFE
waTer pipe
remove The waTer pipe from the water
container for easy cleaning. Please note
that the pipe is not dishwasher safe.
waTer conTainer
The waTer conTainer is not
dishwasher safe. Use a
sponge with a mild
detergent .
seals & rings
These iTems belonging to the light bulb assembly
is not dishwasher safe.
fooD probe
The fooD probe is not
dishwasher safe.
The probe
should be cleaned in mild, detergent
water.
never immerse the probe in water when
cleaning. Simply wipe clean with a
clean, damp cloth or kitchen roll after
use.
Do noT use sTeel-wool paDs. This will
scratch the surface.