Operation Manual

23
Should your dryer operate incorrectly, check the following points before calling for
a qualified service technician.
Drying is too long / laundry is not dry enough:
•
Have you selected the correct drying time or
programme ?
•
Was the inserted laundry too humid
(Washing machine spin speed less than
800rpm)?
•
Is the lint filter dirty (filter indicator light on) ?
After an interruption in the mains supply you
must restart the dryer (Electronic dryer).
The dryer does not operate:
•
Is the plug properly connected to the mains
supply?
•
Is there a power failure?
•
Has the fuse blown?
•
Is the door well closed?
•
Has the drying time or programme been
selected?
•
Has the
Start
button been pressed?
Lint filter light on:
•
Is the lint filter clean?
•
Is the vent hose blocked?
Replacing inside light bulb (if available):
•
If the inside lamp does not work, the bulb
may perhaps be faulty.
• Unplug the dryer !
•
Open the door and unscrew glass cover
inside the drum.
•
Replace faulty bulb with a new one and
screw glass cover back on.
•
Replacement bulb: 15W, 220/240 V, E14,
suitable up to 300°C.
Before contacting After-Sales Service
1.
Try to solve the problem (see “Trouble-
shooting guide”).
2.
Restart the programme to see if the fault is
repeated.
If after the above checks your dryer does not
work properly, get in touch with the nearest
After-Sales Service Centre.
Please give:
•
a short description of the fault.
•
the exact type and model of the dryer.
•
the service number visible on the right when
door is open.
•
Your correct address and telephone number.
TROUBLE SHOOTING GUIDE
AFTER-SALES SERVICE