Operation Manual

16
Drainage System
For water container top
only
To avoid having to
empty the water
container at the end of
each cycle, the
condensation water can
be drained away.
Note:
if the drain hose is not
supplied, the optional accessory
AMH 883 kit, available at your
dealer, should be used.
The connection for direct
draining is at the rear of the
dryer.
A.
Place an absorbent cloth
underneath to collect water
spillage.
B.
Remove the hose located at
the lower rear part of the
dryer and insert it in the
nearby hole.
C.
Fix the hose (length: 1.5 m)
to the outlet connection.
The height difference
between the two drainage
connections should not
exceed 1m.
D.
To avoid siphoning, the end
of the hose must not be
immersed in the drain
water. Avoid bending and
twisting the hose.
B
C