Operation Manual

17
Door Reversibility / Child Safety Lock
Door Reversibility
A.
Unplug the dryer.
B.
Open the door.
C.
Using a spanner, turn the
contact pin in the upper
part of the door by 90° and
remove it.
D.
Unscrew the 2 screws of the
door hinge and remove the
door.
E.
Removing the door lock:
Unscrew the 2 screws above
and below the door lock
system. Lift the door lock
from the bottom, sliding it
upwards about 1,5 cm and
remove it.
F.
Reverse the door:
G.
Fasten the door on the
desired side with the 2
screws.
H.
Insert the door lock system
on the opposite side of the
hinge fixation and push it
down 1.5 cm.
I.
Fix the 2 screws above and
below the door lock system.
J.
Take care not to reverse the
sense of the door lock
system. The child safety
must be above the locking
mechanism.
K.
Replace the contact pin in
the inside of the door (top).
Child Safety Lock
How to use the child
safety lock
1.
Open the door.
2.
Using a coin or a screwdriver,
turn the plastic screw (
J
)
clockwise 90°.
Slot vertical: the door
cannot be locked.
Slot horizontal: the door can
be locked.
C
C
D
J
E
E