User manual

Adjusting the cabinet door
o The nuts and screws on the top of the
fridge door that secure to the fixing
plate (cabinet door) are adjustable.
o Once hanging, you can adjust the level
and centre of the door. The bolts which
the door/fixing plate hang on will
adjust approximately 5mm.
Using an appropriate tool:
o Twist the height adjustment screw to allow for about 5mm
movement in height.
o Loosen the horizontal adjustment nut to allow for about 5mm
movement in width. Retighten the nut once in place.
o Loosen the depth adjustment screw to allow for about 3mm
movement in depth. Retighten the screw once in place.
o Take care to check the clearances on all sides of the door when
making adjustments to ensure that the door opens/closes without
interference.
o Refit the locking nuts onto the top fix plate bolts and tighten,
ensuring the door alignment is still correct.
o Once satisfied, you can then secure the door at the bottom using
the lower fixing brackets.
IMPORTANT: The lower fixing should only be attached when
the door is sitting centrally and horizontal.
31