Operation Manual

Selecting a wash program
9 Load your laundry and put detergent in the relevant
compartment of the soap drawer.
9 Close the porthole door firmly.
9 Turn the wash program selection knob to your desired wash
cycle.
9 Select any relevant program options using the four program
option buttons (see page 11)
o Any program options that you select, will affect the length of
time the wash cycle will take to complete.
9 Press the Start/Stop button.
o The RUN LIGHT and LOCK DOOR lights will come on.
o After approximately 5 seconds, you will hear your washing
machine start the wash cycle.
o If there is a power failure or the plug is pulled out of the
socket when a wash cycle is in progress. Once power has
been restored, the wash program will continue.
At the end of the wash cycle
o Once the washing machine has completed its cycle, the READY
END light will come on. The LOCK DOOR light will remain on.
o After two minutes the LOCK DOOR light will go out. At this point
it is possible for you to open the door and take out the washload.
You should not attempt to open the door until
the LOCK DOOR light has gone out.
17