Baumatic ceramic hobs 1
Contents User Instructions and Installation information. Page. 2. 3. 4–6 7–9 10 11 12 13 – 14 15 16 17 Important Safety Notes General Information Appliance Description Instructions For Use Helpful Hints Cleaning and Maintenance Trouble Shooting Guide Installation Instructions Electrical Connection Technical Data Conditions of Guarantee RATING PLATE The appliance rating plate is located on the underside of the hob, once the appliance is fitted into its housing then the rating plate is no longer visible.
! Important safety notes. We have included this safety information for the purpose of your safety. Please read this information carefully before installing your hob. Should you be unsure of any of these notes please contact the Baumatic Ltd Technical department.
General Information Please read this booklet thoroughly before you use this appliance. It is important that you understand all the control functions before commencing to cook with your Baumatic appliance. The information and warnings contained in this booklet are designed to assist you in obtaining the best use of your new Baumatic appliance.
Appliance Description The following models are covered by this installation and instruction for use manual: B13 / B14SS B15SS 1 BF15SS / AS6.2SS 1 1 2 2 3 4 2 2 1 3 1 1 4 B16SS BF16SS 3 1 2 5 6 1 5 4 4 1 3 B45 2 2 1 3 3 Zone identification. Power and Diameter MODEL AS6.2SS B13 B14SS B15SS BF15SS B16SS BF16SS B45 1 1.20kW – 140mm 1.20kW – 140mm 1.20kW – 140mm 1.20kW – 140mm 1.20kW – 140mm 1.20kW – 140mm 1.10kW – 140mm 0.70kW – 120mm 2 1.20kW – 140mm 1.80kW – 180mm 1.
Voltage 230 V ac 50Hz Total electrical connected load AS6.2 – 6.6kW B13/B14 - 6.0 kW B15/BF15 – 6.4kW B16/BF16 – 7.2kW B45 – 4.8kW Supply connection must be via a switched double-pole isolator with 3mm contact separation. Mains supply connection cable: 3 x 2.5mm2 type H05 RR-F marked Unpacking the appliance.
Touch Controls. B13 AS6.2 B14 B15 BF15 B16 BF16 1. Cooking Zone Selector Key 5. Power On / Off Key 2. Increase Power Key 6. Safety Lock Key 3. Decrease Power Key 7. Double Zone Select Key 4.
Instructions for use These User Instructions should be retained for future reference and for use by any person who is perhaps unfamiliar with the appliance.
B16 The above model also incorporates an additional double heat zone for different type of use the B16 has an oval cook zone This zone can be selected by pressing the appropriate zone key and using the + or keys select the required heat setting, then by pressing the double zone key the oval section of the zone will become operational.
Preheat Time Limits Power Level 1 2 3 4 5 6 7 8 9 Time Limit 1 min 3min 4 min 48sec 6 min 30 sec 8 min 30 sec 2 min 30 sec 3 min 30 sec 4 min 30 sec ----------- Changing the cooking power level during the automatic preheat During the preheat cycle the power level maybe changed by the user after it has been running for a period of at least 3 minutes, this is done by first selecting the zone in use and then using the + or – changing the power level to a new setting, when any such change takes place the ti
Helpful Hints The ceramic surface of the appliance is non-porous and is not sensitive to quick changes in heat, this allows for hot pans to be moved onto cold heat zones without damaging the hob, always ensure that when pans are being moved from zone to zone that they are lifted and placed down gentle onto the surface and not by sliding them across the ceramic surface as this may damage the appliance and will not be covered under the guarantee.
Cleaning and Maintenance Always ensure that the appliance is cool and is switched off at the mains electrical supply before cleaning commences. Never use abrasive cleaning agents such as oven sprays, stain remover, scouring powder or sponges that have an abrasive effect. Specialist cleaners for ceramic hobs are available from good department stores and a ceramic glass scraper is supplied with this product to assist in the removal of stubborn stains.
Trouble Shooting Guide In the unlikely event that your hob is not working correctly please carry out the various checks listed in the table below calling out a Baumatic Engineer. Important: Should you call out a Baumatic engineer and the fault is listed in the table below or to repair a fault that is because of incorrect installation or use of the appliance then a charge will be made even though the appliance is within the warranty period.
Installation Instructions This appliance must be installed by a competent person in accordance with the current version of the following UK regulations and safety standards or their European normal replacements. Building Regulations (Issued by the Department of the Environment). Building Standards (Issued by the Scottish Development Department).
Fig 3. Screw SEALANT Clamp HOB APERTURE DIMENSIONS MODEL AS6.
Electrical Connection This appliance must be installed by a competent person, such as one holding NICEIC Registration and in accordance with the latest edition of the IEE WIRING Regulations. Before connecting the appliance, make sure that the supply voltage marked on the rating Plate corresponds with the mains supply voltage.
Technical Data ELECTRICAL DETAILS. Rated Voltage: 230V ac 50Hz Supply Connection: Switched Double pole Isolator with 3mm minimum contact separation. Mains supply cable rating: H05 RR-F
marked or above POWER INPUTS AND PROTECTIVE FUSE RATING. MODEL Max kW Total Amps Min Fuse Protection Rating AS6.2 B13 B14 B15 B16 BF15 BF16 6.6 6.0 6.0 6.4 7.2 6.4 7.2 28.6 26.1 26.1 27.8 30 27.BAUMATIC Ltd GB CONDITIONS OF GUARANTEE Dear Customer, Included with your new Baumatic appliance is a guarantee registration card, please complete this and return and your earliest convenience. This guarantee is in addition to your statutory legal rights and will not in any way hinder any legal rights.
2