User manual

22
3) IMPORTANT: Support the oven door from the underneath
whilst attempting the next stage.
o Rotate the control panel as shown whilst supporting the
underneath of the oven door.
o Pull the door away from the oven cavity and gently lean it on
some padded material, to ensure that no damage is caused to
the oven door or door glass.
4) Loosen the screws of the
rear cover, but before
removing the cover, you
should disconnect the
wiring going into the switch
box.
5) Loosen the screws that are shown
in the diagram opposite, on both sides
of the appliance.
No other screws should be
removed.