B270M-A/B275M-A 60cm Large capacity multifunction oven 1
ELECTRIC BUILT-IN OVENS B270M-A B275M-A . USER AND INSTALLATION INSTRUCTIONS LIB30112 For future reference please record the following information which can be found on the Rating Plate and the date of purchase which can be found in the invoice: Model Number ………………………………. Serial Number ………………………………. Date of Purchase ………………………………. Supplier ……………………………….
1. TECHNICAL DATA MODELS Rating voltage Fun heating element (2300W) Lower heating element (1000W) Traditional upper heating element (900W) Traditional grill heating element (1900W) Current Maximum power Dimensions B260SS B270M B275M 230-240V ● ● ● ● 16 A 2800 W 596 x 596 x600 230-240V ● ● ● ● 16 A 2800 W 596 x 596 x600 230-240V ● ● ● ● 16 A 2800 W 596 x 596 x600 B260SS B270M-B275M 2. PRELIMINARY REMARKS Please read this booklet thoroughly before you install and use this appliance.
• • Cleaning of the oven should be carried out on a regular basis. Keep this instruction manual safe for persons not familiar with the operation. 3. DECLARATION OF CONFORMITY In the parts destined to come into contact with foodstuffs, this appliance is in accordance with the requirements of the EC directive 89/109 transposed in the Italian Legislative Decree N° 108 of 25/01/92. CE Appliance conforming to the European directives 89/336/EEC, 93/68/EEC, 73/23/EEC and subsequent revisions.
Fixing the oven to the unit • • • Place the oven into the piece of kitchen furniture it is to be installed in. The holes of the holding screws are: top right and top left the frontal frame of the oven. Secure the oven with the fixing screws.
5. OVEN DESCRITPION Command button B260SS CONTROL PANEL B270M-B275M CONTROL PANEL DISPLAY DETAIL 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Oven function selector knob - set the oven operating mode depending on the type of cooking required. Oven tension light - displays that a function has been selected. Timer display. Timer Minute minder button – set the minute minder function. Timer “Duration” button – set the duration function. Timer “End of cooking” button – set the end of cooking button.
Oven Mode selector switch The oven switch selects the desired cooking function. (turn the knob anti-clockwise). The available cooking functions combine the different heating element with the cavity cooling. Oven thermostat The oven thermostat sets the required temperature of the oven. It is possible to regulate the temperature value within the range of 50-250°C. (turn the knob anti-clockwise). Oven operating light It informs that the oven heating elements are in operation.
FAN ASSISTED FULL GRILL MODE: The top heating element and the grill are turned on along with the fan. This combination increases the heating through forced circulation of the air throughout the oven. This helps prevent foods on burning on the surface, allowing the heat to penetrate into it FAN ASSISTED CONVECTION MODE: The top and bottom heating elements are turned on, as well as the fan inside the oven.
SUGGESTED COOKING TABLE The following table contains an advise f how to set the oven. The cooking times are approximate and may vary according to personal taste.
Duration (hrs/min) Set the oven to the required temperature. The Heating symbol (14) will illuminate. Once selected the operating mode via the selector knob (1), it is possible to set the duration of cooking time. o o o o o Press the Duration mode button (5). The display (3) will show the value 00:00. Set the desired time for the duration of cooking with the +/- buttons (9) and (8). As soon as the time is set, it will start the countdown and the word AUTO (12) will appear in the display.
13. CLEANING AND MAINTENANCE Thoroughly clean the oven before operating it for the first time and after every use, thus avoiding baking in of residual food stuffs. After residues have baked in several times, they are then difficult to remove. Never clean the oven surfaces by steam cleaning. Cleaning operations must be carried out only when the equipment get cold. Any stains that may appear on the bottom of the oven always originate from splashes or overflowed food.
Reversing the door of your appliance (B270 & B275) IMPORTANT: This operation must be only carried out by a suitably qualified person. Baumatic Ltd. do not recommend that a customer completes this operation. o It is necessary to disconnect the oven from the mains before executing the operations described in the present manual. o Please read this text thoroughly before starting with the work.
2) Loosen the screws that fix the control panel. These can be found in the following positions:o On the stainless steel sides of the oven. o On the base of the control panel (where the ventilation slots are cut out). 3) IMPORTANT: Support the oven door from the underneath whilst attempting the next stage. o Rotate the control panel as shown whilst supporting the underneath of the oven door. o Remove the upper pivot pin.
4) Unscrew the fixing plate (A) and fix it to the other side of the oven using the screws that you have just removed. The new position of the fixing plate is indicated by the arrow with the letter A next to it. o Remove the bottom pivot (B) from the left lower holder and place it in the right lower holder. The new position of the bottom pivot is indicated by the arrow with the letter B next to it. 5) Turn the door upside down and refit it to the oven cabinet.
IMPORTANT: When the above steps have been followed, it is necessary to reassemble all of the components. o You should pay particular attention to the wiring, it is important to make sure that no wiring has been damaged during the door reversal operation. o You should ensure that all the electrical components and the oven programmer work correctly before refitting the upper cove r of the oven.
Baumatic Ltd. Conditions of guarantee Dear Customer, Your new Baumatic appliance comes complete with a free 12 month guarantee covering both parts and labour costs resulting from defective materials or workmanship. Baumatic also gives you the opportunity to automatically extend the guarantee period for a further 12 months at no extra cost, giving an initial guarantee period of 24 months. The extended guarantee period applies to England, Scotland, Wales and Northern Ireland only.
2
