User manual
15
Un
hen unpacking the appliance please check that the following items
kaging:
x Burner assemblies
instruction manual
antee card
esive label for amending the Gas Category on the
plate (required if the LPG conversion kit is used).
o
n
of the appliance and any surface that is below it.
packing the appliance
W
are contained within the pac
1 x Baumatic hob
2 x Pan supports
4
1 x Installation and
1 x Baumatic guar
4 x Fixing screws
4 x Clamps
1 x Sealing strip
4 x LPG jets
1 x Self-adh
appliance’s rating
Installing the appliance
Cut a hole in the worktop that corresponds with the drawings
shown above.
o IMPORTANT: You must have a gap of at least 25 mm betwee
the underneath