User manual

23
lectrical connection
e installed by a qualified
ccordance with the latest edition of the
E.E. Regulations and in compliance with Baumatic’s
n
marked on the rating plate corresponds with your mains supply
voltage.
o The mains supply cable is supplied with this product.
e lacing the mains supply cable
t e mains supply cable is damaged, then it must be replaced by an
obtained from the Baumatic
pares Department.
o Open the box of the supply board.
o Unscrew the clamp (A) fixing the cable.
o Replace the cable with one of the same length and in accordance
E
This appliance must b
person in a
I.
instructions.
ecting the appliance, make sure that the supply voltage Before con
o Cable type: H05 RRF 3 core x 0.75 mm³
R p
If h
appropriate replacement which can be
S
The mains supply cable should be replaced in accordance with the
following instructions:
o Switch the appliance off at the control switch.
with the specification given above.
o The “green-yellow” earth wire must be connected to the terminal
marked
. It must be about 10 mm longer than the live and
neutral wires.
o ”
tter (N) - the live wire must be connected to the
rminal marked with letter (L).
The “blue neutral wire must be connected to the terminal
marked with le
te