MEGACHEF B600MC 60 cm Fan Oven User Manual for your 1
User Manual for your Baumatic MEGACHEF B600MC 60 cm Fan Oven NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.
Contents Environmental note Important safety information 4 5-7 Specifications Product and aperture dimensions Product specifications Standard accessories Electrical details Cooling fan Control panel Oven programmer/timer display 8 - 10 8 8 8 9 9 10 10 Initial set-up of your oven Setting the time of day Before first use 11-12 11 11 Setting and using the oven timer Setting the minute minder function Setting the duration cooking function Setting the end cook function Setting the automatic cooking functio
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Customer Care Department. General Information o This appliance is designed for domestic household use and can be built into a standard kitchen cabinet or housing unit.
o This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time.
Installation This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s instructions. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance. o Heat, steam and moisture will be created during use of the appliance, take care to avoid injury and ensure that the room is adequately ventilated.
Specifications Product Dimensions Aperture Dimensions Height: Width: Depth: 585-590 mm 565 mm 585 mm (min) 595 mm 595 mm 575 mm Product specifications o o o o o o o o 5 oven functions Energy efficiency class: A Oven gross capacity: 65 litres Oven net capacity: 62 litres LED full programmer Cooling fan Double-glazed removable door Oven light Standard accessories o o o o Enamelled baking tray with handle 2 x Shelves Trivet Removable side racks 8
Optional extra o BPS2 Pizza stone Electrical details Rated Voltage: Supply Connection: Max Rated Inputs: Mains Supply Lead: Oven Light Bulb: 220-240 Vac 50 Hz 13A (double pole switched fused outlet with 3mm contact gap) 2.10 kW 3 x 1.5mm² 25 W/300°C screw type pygmy Cooling fan o A tangential cooling fan is fitted inside of this appliance, to make the internal temperature of the oven stable and the external surface temperature lower.
Control Panel 1) 2) 3) 4) Oven function selector knob Thermostat control knob LED display Oven timer buttons Oven programmer/timer 5) Automatic cooking symbol 6) Oven in use symbol 7) Decimal point symbol 8) Minute minder symbol 9) Plus button 10) Programme button 11) Minus button 10
Initial set-up of your oven Setting the time of day After your appliance is connected to your mains supply for the first time, you must set the time of day before you can use the oven. o When the oven is connected to your mains supply for the first time (or after a power cut), the digits on the LED display will show “12:30” and the decimal point (7) will flash. o Whilst the decimal point symbol (7) is flashing, use the plus (9) and minus (11) buttons to set the correct hour of day.
o We would recommend that an appropriate stainless steel cleaner and polish is regularly used on the stainless steel surfaces of this appliance. Timer functions The minute minder function The minute minder function is a countdown time that can be set on the oven programmer/timer. When the countdown time has finished, an audible signal will sound. o Press the programme button (10). The minute minder symbol starts to flash to enter programming mode.
The duration cooking function This function will allow you to set a countdown time similar to the minute minder function, however the oven will switch off at the end of the cooking time. o Place the food that you want to cook inside of the oven and close the door. o Select an oven function and cooking temperature using the relevant control knobs. o Press programme button until “dur” appears on the LED display. o Use the plus (9) and minus (11) buttons to set the cooking time that you require.
The end of cooking function This function is similar to the duration function, however instead of setting a countdown time, you select the time of day that you want the oven to switch off at. o Place the food that you want to cook inside of the oven and close the door. o Select an oven function and cooking temperature using the relevant control knobs. o Press the programme button (10) until ”End” is displayed on the LED display. The automatic cooking symbol and the current time of day will flash.
The automatic cooking function This function will allow you to set the time of day that you want the oven to switch off at and how long you want the oven to cook for. o Place the food that you want to cook inside of the oven and close the door. o Select an oven function and cooking temperature using the relevant control knobs. o Press the programme button (10) until “dur” appears on the LED display. o Use the plus (9) and minus (11) buttons to set the cooking time that you require.
Cancelling a timer function o Press and hold down the plus button (9) and the programme button (10) simultaneously, until you hear a beep. The automatic cooking symbol (5) will go out. o If you are half way through programming the timer and would like to cancel it and/or start again, press and hold the program button (10). Changing the time of day o IMPORTANT: The oven timer/programmer must not be in any form of countdown mode.
Selecting a cooking function and temperature IMPORTANT: Make sure that you have set your oven into manual operation mode before selecting an oven function and temperature. Selecting an oven function The oven function selector knob should be used to select the particular mode of cooking that you require. The appliance will utilise different elements within the oven cavity, depending on the oven function that you select. When a function is selected, the power indicator light will come on.
Cooking guidelines o Please refer to the information given on food packaging for guidance on cooking temperatures and times. Once familiar with the performance of your appliance, temperatures and times can be varied to suit personal preference. o You should pre-heat the oven and not place food inside of it until the oven operating light has gone off. You can choose not to preheat the oven however you should extend the cooking time given on the food packaging by at least ten minutes.
them inadvertently when handling the food which you are grilling. o The internal components of the oven become extremely hot during operation, care should be taken avoid touching them inadvertently. o Important: Be careful when opening the door, to avoid contact with hot parts of the oven and steam. o Warning: Accessible parts may become hot during use. Young children should be kept well away from the oven when it is in use. o When removing the enamelled baking tray, you should ALWAYS use an oven glove.
Cleaning and maintenance Cleaning operations must only be carried out when the oven is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. o The oven should be thoroughly cleaned before it is operated for the first time and after each use. This will avoid residual food stuffs becoming baked on the oven cavity. After residues have been baked on several times, they are far more difficult to remove. o Never clean the oven surfaces by steam cleaning.
Replacing the oven bulb IMPORTANT: The oven must be disconnected from your mains supply before you attempt to either remove or replace the oven bulb. o Remove the oven shelves and the baking tray. o Remove the light cover turning it anti-clockwise. by o Unscrew the bulb anti-clockwise and remove it from its holder. o Replace the bulb with a 25 W/300°C, screw type pygmy. o Do not use any other type of bulb. o Place the lamp cover back into position.
o The oven door and door glass should only be cleaned using a damp cloth and a small amount of detergent. The cloth MUST NOT have come into contact with any form of cleaning product or chemical previously. o To refit the door you should slide the hinges back into their slots and open the door fully. o IMPORTANT: The movable bolts (B) must be closed back into their original positions before closing the door.
INSTALLATION The installation must be carried out by a suitably qualified person, in accordance with the current version of the following. o UK Regulations and Safety Standards or their European Norm Replacements. o Building Regulations (issued by the Department of the Environment). o Building Standards (issued by the Scottish Development Department). o IEE Wiring Regulations. o Electricity At Work Regulations.
o If you have to change the oven power cord, the earthing (yellow/green) conductor must always be 10 mm longer than the line conductors. o Care must be taken to ensure that the temperature of the mains supply cable does not exceed 50°C. o If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained from the Spares Department.
Ventilation requirements (Figure shows the ventilation and cut-out requirements for the installation of the appliance into a standard kitchen unit). (Figure shows the ventilation and cut-out requirements for the installation of the appliance into a tall housing unit). o Ensure that the oven has been securely fixed into the housing unit. The fixing of the oven into the housing is made by using four screws and caps, which are supplied with the oven.
My appliance isn’t working correctly o The oven isn’t coming on. * Check that the oven is in manual operation mode. * Check that you have selected a cooking function and a cooking temperature. o There appears to be no power to the oven and grill. * Check that the appliance has been connected to the electrical mains supply correctly. * Check that the mains fuses are in working order. * Check that the operating instructions for putting the appliance into manual operation mode have been followed.
o I am getting condensation in my oven * Steam and condensation is a natural by product of cooking any food with high water content, such as frozen food, chicken etc. * You may get condensation in the oven cavity and forming between the oven door glasses. This is not necessarily a sign that the oven is not working correctly. * Do not leave food in the oven to cool after it has been cooked and the oven has been switched off.
Baumatic Consumables o BC001 Degreaser for Dishwashers (200 g) o BC002 Descaler for Washing Machines and Dishwashers (200 g) o BC003 Ceramic Hob Cleaner (250 ml) o BC004 Oven Cleaner (250 ml) o BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 437244 Advice Line Telephone (0118) 933 6933 E-mail: sales@baumatic.co.uk customercare@baumatic.co.uk spares@baumatic.co.uk technical@baumatic.co.uk Czech Republic/Slovakia Baumatic s.r.o.
