User manual

19
f position.
n be lit by carefully using
a match.
utomatic ignition (BT62.1SS/B68.1SS)
aximum position.
aximum and minimum setting symbols.
f position.
he appliance is fitted with a flame failure safety device on each
igned to stop the flow of gas to the burner head in
e event of the flame going out.
aximum position.
o After this 20 second interval, turn the control knob to your
the burner off, turn the control knob fully clockwise to
the gas off position.
o To switch the burner off, turn the control knob fully clockwise to
the gas of
o In case of power failure, the burners ca
A
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the m
o If you keep the control knob depressed, the automatic ignition
for the burner will operate.
o Once the burner is lit, turn the control knob to your required
setting between the m
o To switch the burner off, turn the control knob fully clockwise to
the gas of
o In case of power failure, the burners can be lit by carefully using
a match.
Automatic ignition with flame failure safety device
(B17.8SS/B68.1TCSS/BG67.1SS/BT62.1SS)
T
burner, which is des
th
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the m
o If you keep the control knob depressed, the automatic ignition
for the burner will operate.
o You should hold down the control knob for 20 seconds after the
flame on the burner has lit.
required setting between the maximum and minimum setting
symbols.
o To switch