User manual

erside of the horizontal surface is lower than 400 mm,

then it must be at least 50 mm away from the outer edges of

o 50 mm clearance around the appliance and between the hob

stible materials.

hen unpacking the appliance please check that the following items

n the packaging:

nual

warranty card

elf-adhesive label for amending the gas category on the appliance’s

LPG conversion jets are used).

T62.1SS

T62.1TCSS

o 400 mm between the hob surface, providing that the underside

of the horizontal surface is in line with the outer edge of the hob.

If the und

the hob.

surface and any combu

Unpacking the appliance

are contained withi

1 x Baumatic hob

Pan stands

Burner assemblies

Instruction ma

Baumatic

Fixing screws

Clamps

Sealing strip

LPG conversion jets

rating plate (required if the

Installing the appliance

B46.1SS

B46.1TCSS

B60.3SS

BT61.1SS