User manual

17
Crease care: Will introduce clockwise rotations at the end of the wash
cycle, which will help to reduce the amount of creasing that you get in
garments.
Eco: By selecting the Eco wash program, the water temperature is
lowered and the washing time is increased. This allows you to reduce
energy consumption.
Wash program guidance
o A wash program option can only be selected if the program table
advises that it is possible with the wash cycle you have selected.
o The washing machine automatically selects a temperature for a
particular wash program. However it is possible to alter the
temperature by using the TEMP button. The available temperatures
are shown in the wash program table on the previous page.
o The washing machine automatically selects a spin speed for a
particular wash program. However it is possible to alter the spin
speed by using the SPIN button. Certain spin speeds will not be
available on particular wash cycles.
o Important: You should make sure that the selected spin speed is
appropriate for the garments that you are washing.
o If you select “rinse hold”, then the machine will leave the garments
suspended in water after the rinses and not go into a spin cycle.
o Important: Before opening the door of the appliance, you MUST
spin the clothes and drain the water. See the section called “Spin
only” on page 23 - 24.
o The active phases will appear at the top of the LED display, as the
wash program progresses.
o The LED display shows an approximate time for the selected wash
cycle. Please note that factors external to the machine, e.g. the
temperature of your water supply, your water pressure etc. can
affect the time it takes for a wash cycle to complete.