User manual

27
Child lock
Your appliance has a child lock, if this is set it will mean that nobody
can affect the operation of the wash program once it has started.
o Select a wash program and any program options that you
require in the normal manner.
o Press the START/PAUSE button to start the wash cycle.
o Simultaneously hold down the TIME SAVE and TIME DELAY
buttons for a few seconds, the child lock light will come on.
o When the Child Lock light is switched on, the only button/dial
that will operate is the POWER button. If you turn the washing
machine off using the POWER button, the child lock option will be
cancelled.
o To change the wash cycle when the child lock is engaged, press
the TIME SAVE and TIME DELAY buttons simultaneously, then
press the START/PAUSE button.
o Use the wash program selection knob to select the program that
you want to use and then press the START/PAUSE button again
to start the wash cycle.
Maintenance and cleaning
In daily use
o Once a wash cycle has completed, you should pull out the
detergent drawer slightly, so it can dry out.
o Leave the porthole door ajar for a short while after a wash cycle
has completed. This should help to prevent stagnant smells and
to protect the door seal.
o Close the water tap.
o We suggest that you disconnect the appliance from your mains
supply, when it is not in use.
Control panel and washing machine cabinet.
IMPORTANT: Do not use any abrasive cleaner or household polish on
either the control panel or operating parts.
o Wipe over the control panel and the external surface of the
machine using a brand new damp cloth with warm water.